Mixing Solution

​

1. Flip the cap off the top of the vial containing the white powder.

2. Snap the top off the water ampule if glass or twist off if plastic.

3. Take the syringe out of its packaging and insert the needle into now open the water ampule through the opening created when removing the top.

4. Draw 1ml of water out of the water ampoule and insert it  into the vial containing the MT2 through the rubber stopper. Repeat. You should now have 2ml of water in the vial of MT2 to create your tanning solution.

5. Twirl the vial to mix the solution. Do not shake. The solution is ready to be used. Store in the refrigerator between uses.

 

Dosage

​

1. Insert the needle into the solution and draw up around 0.2ml (20 units) of MT2 solution in the syringe.

2. Find a fleshy area of your body (usually next to the belly button), and pinch around 2cm of skin between your fingers and thumb.

3. Insert the needle straight into the skin at a 90 degree angle/perpendicular to the skin and inject the solution.

 

As  far as frequency is concerned,  use tanning injections on alternate days until the right colour is achieved. After that a dose per week is sufficient. Time of day does not matter, some people like to use around an hour before going on the sunbed.

 

For best results, use alongside regular sunbeds. For new users, you can use only half the amount for the first few times.